For example: Agilent E4440A or Anritsu 68369
FET Probe 900MHz

Model:P6201

Manufactured by: Tektronix

Category:Probes

Tektronix P6201 - Probes

Tektronix P6201 Overview

Features

For 50 Ohm and 1 Megaohm Interfaces

  • True Signal Fidelity, DC up to 900 MHz
  • 1.5 pF Input C*1
  • 1 megaohm Input R*1:
  • 1X/10X/100X
  • AC-DC Coupling
  • Variable DC Offset, up to ±200 V
  • Selectable 50 Ohm, Termination for Use with 50 Ohm or 1 megaohm Inputs

    Applications*1

  • Digital Design and Debug of Logic Families
  • Component Characterization/Measurement of High-speed Analog Circuitry
  • Digital Design and Debug of Logic Families such as:
  • ECL
  • GaAs
  • MOS: CMOS; FastCMOS; BiCMOS
  • TTL
  • Component Characterization/Measurement of High-speed Analog Circuitry
  • Relative to:
  • Amplitude Levels
  • Aberrations
  • Propagation Delay and Timing
  • Bandwidths and Rise Times

    P6201/P6202A

    The P6201 and P6202A are Low Circuit Loading Active Signal Acquisition probes for Tektronix 400 Series, 2400 Series and 7000 Series Families of Oscilloscopes.

    The P6201 and P6202A with Active FET devices in their inputs provide very high input impedances.

    Both the P6201 and P6202A probes provide a wide linear dynamic input range for accessing most digital device families using today's logic voltage levels.

    The P6201 provides unity gain (1X) and is the best general purpose FET probe within its voltage range. Plug-on attenuator heads provide wider dynamic ranges (10X and 100X), while maintaining the oscilloscope readout factor.

    Wider dynamic input range for the P6202A is achieved by an optional 10X attenuator head which provides 100X attenuation.

    Both the P6201 and P6202A probes provide a variable DC Offset function which is set via the offset controls on the probe's compensation box to bring signals (those within the offset control range) into the dynamic range of the probe.

    AC or DC coupling selection is available on the P6201 and P6202A FET Probes. When AC coupled, the DC voltage component is blocked, allowing viewing of superimposed signals.

    A self-contained selectable 50 Ohm termination switch allows the P6201 or P6202A to be terminated into a 50 Ohm or 1 megaohm oscilloscope inputs.

    Power for the P6201 and P6202A is supplied by the 400 Series, 2400 Series and 7000 Series mainframes through the optional Probe Power Jack or the 1101A Power Supply.

    The P6201 or P6202A may also be used with other 50 Ohm and 1 megaohm input real-time oscilloscopes, sampling systems, spectrum analyzers and counters via the 1101A and appropriate interface adapters (SMA to BNC, GR to BNC, etc.).

  • How can we help you with today?