Anritsu MS8604A Overview
Features:
Major transmitter functions evaluated by a single system
Compatible with NADC, PDC, PHS, Digital MCA, GSM, DCS1800 (PCN), CT2, DECT, WCPE, PACS, RCR STD-39 TETRA systems, and GMSK and pi/4 DQPSK universal measurement (measurement software can be installed as an option)
High-speed measurement (under 1 second for modulation-accuracy measurements)
Input up to 10 W (internal 20 dB attenuator and power meter for high power levels)
Quick configuration for different communication systems
One-touch selection of measurement items
Direct measurement with broadband power sensor
Internal calibration signal
High-power measurements
Measurement of antenna power and leakage power during carrier-off
Frequency Range: 100Hz to 8.5GHz
Max. input level: +40 dBm (10 W)
Frequency:
Setting Range: 100Hz to 8.5GHz (resolution: 1Hz), 0 to 2 GHz (freq. band: 0), 1.7 to 7.5GHz (freq. band: 1-), 6.5 to 8.5 GHz (freq. band: 1+)
Preselector range: 1.7 to 8.5 GHz (bands: 1-/1+)
Span: Setting range: 0 Hz, 100 Hz to 8.5 GHz
RBW: Setting range: 10 Hz to 3 MHz (3 dB), 1-3 sequence
Amplitude:
Level measuring range: Average noise level to +40 dBm. Average noise level: < -112 dBm
Reference Level: Setting range: -80 to +40 dBm; Input attenuator: Setting range: 20 to 75 dB in 5 dB steps
Detection mode: POS PEAK, SAMPLE, NEG PEAK
AM/FM demodulation: Demodulated waveform display and monitoring demodulated audio signal with internal speaker
Frequency Range: 100 kHz to 5.5 GHz
Level Range: -20 to +20 dBm
Applicable power sensor: MA4601A
External Memory: one slot
Direct plotting: can hard-copy screen via GPIB 2
External Control:
GPIB 1 - As device controlled by host
GPIB 2 - Controls other instruments as controller
Setting Range: 100Hz to 8.5GHz (resolution: 1Hz), 0 to 2 GHz (freq. band: 0), 1.7 to 7.5GHz (freq. band: 1-), 6.5 to 8.5 GHz (freq. band: 1+)
Preselector range: 1.7 to 8.5 GHz (bands: 1-/1+)
Span: Setting range: 0 Hz, 100 Hz to 8.5 GHz
RBW: Setting range: 10 Hz to 3 MHz (3 dB), 1-3 sequence
Level measuring range: Average noise level to +40 dBm. Average noise level: < -112 dBm
Reference Level: Setting range: -80 to +40 dBm; Input attenuator: Setting range: 20 to 75 dB in 5 dB steps
Detection mode: POS PEAK, SAMPLE, NEG PEAK
AM/FM demodulation: Demodulated waveform display and monitoring demodulated audio signal with internal speaker
