| B11 |
Internal Combiner. Provides two-tone signal at Port 1. (requires attenuators ZVT20-B21/-B23 |
| B16 |
Direct Generator/Receiver Access |
| B21 |
Generator Step Attenuator Port1, mechanical |
| B23 |
Generator Step Attenuator Port3, mechanical |
| B32 |
Receiver Step Attenuator Port 2; mechanical |
| B34 |
Receiver Step Attenuator Port 4; mechanical |
| B63 |
Additional Port 3 (Port 1 and Port 2 Standard ) |
| B64 |
Additional Port 4 (requires Port 1 to Port 3) |
| B65 |
Additional Port 5 (requires Port 1 to Port 4) |
| B66 |
Additional Port 6 (requires Port 1 to Port 5) |
| C3 |
THREE YRS OF DEPOT FACTORY STANDARD CALIBRATION BASED ON THE R&S RECOMMENDED CALIBRATION INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH PRODUCT DELIVERY WITH 2 ADDITIONAL DEPOT CALIBRATION(S). |
| C5 |
FIVE YRS OF DEPOT REPAIR COVERAGE, INCLUDING FACTORY STANDARD RE-CALIBRATION IF NECESSARY TO COMPLETE THE REPAIR. FIRST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY. |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| R3 |
THREE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING FACTORY STANDARD RE-CALIBRATION IF NECESSARY TO COMPLETE THE REPAIR. FIRST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY. |
| R5 |
FIVE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING FACTORY STANDARD RE-CALIBRATION IF NECESSARY TO COMPLETE THE REPAIR. FIRST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY. |
| ZV-WR03 |
Calibration kit WR03, 220 GHz to 325 GHz (for ZVA-Z325) |
| ZV-WR10 |
Calibration Kit WR10 75GHz to 110GHz (for ZVA-Z110) |
| ZV-WR10 |
Calibration Kit WR10 75GHz to 110GHz with Sliding Match |
| ZV-WR15 |
Calibration kit WR15, 50GHz to 75GHz (for ZVA-Z75) |
| ZV-WR15 |
Calibration kit WR15, 50GHz to 75GHz, with Sliding Match |
| ZV-Z121 |
Calibration Kit N, 50 Ohm, Male. Open, Short, Match, Through combination, 0 Hz to 8 GHz |
| ZV-Z121 |
Calibration Kit N, 50 Ohm, Female. Open, Short, Match, Through combination, 0 Hz to 8 GHz |
| ZV-Z132 |
Calibration Kit 3.5mm(m). Open, Short, Match, Through combination, 0Hz to 13GHz |
| ZV-Z132 |
Calibration Kit 3.5mm(f). Open, Short, Match, Through combination, 0Hz to 13GHz |
| ZV-Z1829 |
Adapter 1.85mm(f) / 2.92mm(m) |
| ZV-Z193 |
RF Cable 50 Ohm; PC3.5mm(f)-PC3.5mm(m); DC to 26.5GHz, flexible, phase stable; 610mm (24 inch) |
| ZV-Z193 |
RF Cable 50 Ohm; PC3.5mm(f)-PC3.5mm(m); DC to 26.5GHz, flexible, phase stable; 910mm (36 inch) |
| ZV-Z194 |
RF cable 75 Ohm; DC to 3GHz; N(m)-N(m); 60cm(24 inch) |
| ZV-Z194 |
RF cable 75 Ohm; DC to 3GHz; N(m)-N(m); 91cm(36 inch) |
| ZV-Z195 |
RF Cable 50 Ohm; 2.92mm(f)-2.92mm(m); DC to 40GHz, flexible, phase stable; 610mm (24 inch) |
| ZV-Z195 |
RF Cable 50 Ohm; 2.92mm(f)-2.92mm(m); DC to 40GHz, flexible, phase stable; 910mm (36 inch) |
| ZV-Z26 |
TRL/LRL supplement calibration kit N 50 Ohm |
| ZV-Z27 |
TRL/LRL supplement calibration kit 3.5mm |
| ZV-Z28 |
SUPPLEMENTARY CALIBRATION KIT N 50 OHM, TOM-X |
| ZV-Z29 |
SUPPLEMENTARY CALIBRATION KIT PC 3.5, TOM-X, |
| ZV-Z2918 |
Adapter 2.92mm(f) / 1.85mm(m) |
| ZV-Z35 |
Calibration kit 2.92mm 0 - 40 GHz with sliding matches |
| ZV-Z36 |
Calibration Kit 2.4mm, 0Hz to 50GHz, fixed matches |
| ZV-Z41 |
Sliding match, N 50 Ohm |
| ZV-Z42 |
Sliding matches, 3.5mm pair male and female 0 - 26.5 GHz |
| ZV-Z44 |
2.92 mm sliding matches pair male and female 0 - 40 GHz |
| ZV-Z52 |
Calibration unit, 10 MHz - 24 GHz, 4 ports, 3.5mm (f) |
| ZV-Z53 |
Calibration Unit 300kHz to 24GHz, 2 ports, 3.5mm(f) |
| ZV-Z53 |
Calibration Unit, 300kHz to 18GHz, 2 ports, N(f) |
| ZV-Z54 |
Calibration Unit, 10MHz - 40GHz, 2 ports, 2.92mm(f) |
| ZV-Z55 |
Calibration unit, 10MHz - 50GHz, 2 ports, 2.4mm(f) |
| ZV-Z58 |
Calibration unit, 300 kHz - 8 GHz; 8 ports, 3.5mm(f) |
| ZV-Z60 |
T check, 50 Ohm, up to 4 GHz N-male/female |
| ZV-Z61 |
Bias-Tee 2 MHz - 4 GHz N-male/female |
| ZV-Z71 |
Cables(pair) for ZVA/ZVB/ZVT DC inputs |
| ZV-Z93 |
Flexible Precision Cable 50 Ohm 3.5mm(f)Ruggedized / 3.5mm(m) DUT; DC to 26.5GHz; 635mm(25 inch); 1 piece |
| ZV-Z93 |
Flexible Precision Cable 50 Ohm 3.5mm(f)Ruggedized / 3.5mm(m) DUT; DC to 26.5GHz; 965mm(38 inch); 1 piece |
| ZV-Z95 |
Flexible Precision Cable 50 Ohm; 2.92mm(f)Ruggedized / 2.92mm(m) DUT; DC to 40 GHz; 635mm(25 inch); 1 piece |
| ZV-Z95 |
Flexible Precision Cable 50 Ohm; 2.92mm(f)Ruggedized / 2.92mm(m) DUT; DC to 40 GHz; 965mm(38 inch); 1 piece |
| ZV-Z97 |
Flexible Precision Cable 50 Ohm, 2.4mm(f) Ruggd. to 2.4mm(m) DUT, DC to 50GHz, 63.5cm(25inch); 1piece |
| ZVA-B7 |
Measurements on pulsed signals. Pulse profile,Recording time up to 25ms, up to 30MHz bandwidth |
| ZVA-B8 |
External attenuator control. Control unit for electronic attenuators of ZVAZ90E, ZVA-Z110E |
| ZVA-K10 |
Group delay measurement on converters without LO access. For long distances via LXI network of 2 ZVA or ZVT. |
| ZVA-K17 |
Increases the receiver bandwidth to 5MHz |
| ZVA-K27 |
Two internal pulse generators (for ZVA and ZVT) |
| ZVA-K4 |
Frequency converting measurement for ZVA and ZVT |
| ZVA-K5 |
Phase measurement on mixers (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required) |
| ZVA-K6 |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| ZVA-K7 |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| ZVA-K8 |
Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
| ZVA-K9 |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| ZVAB-B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| ZVAB-K2 |
Time domain (for ZVA, ZVB, ZVT) |
| ZVAB-K30 |
Noise figure measurement on linear and frequency converting 2 port devices (for ZVA, ZBV and ZVT, |
| ZZA-111 |
19" adapter, 1HU, 1/1 for BW2000 cabinets |
| ZZA-12 |
19" adapter, 2 x 1/2 wide, 2 HU for DPSP, NAP, PTC/M, PSU/N, URE, UDS5, UVZ, URV3/4/5, NRV |
| ZZA-478 |
19" adapter, 4 HU, 7/8 for BW2000 cabinets |
| ZZA-511 |
19" adapter, 5 HU, 1/1 for BW2000 cabinets |
| ZZA-611 |
19" adapter, 6 HU, 1/1 |
| ZZA-91 |
19" adapter 1 HU, 1/1 width, for KB90 cabinets |
| ZZA-92 |
19" adapter 2 HU 1/1 for KB 90 cabinets |
| ZZA-924 |
Adapter for telescopic slides (C-300-S, C-230-S) for KB90 cabinets 2 - 6 HU 1/1 depth = 460 mm |
| ZZA-925 |
Adapter for telescopic slides (C-300-S, C-230-S) for KB90 cabinets 2 - 6 HU 1/1 depth 570 mm |
| ZZA-93 |
19" adapter 3 HU 1/1 for KB 90 cabinets, eg. SWM, AFG/U, SMG, SMH, SMX, etc. |
| ZZA-94 |
19" adapter 4 HU 1/1 for KB 90 cabinets, eg. PSA2/5, SMGU, SMHU, CMD, etc. |
| ZZA-95 |
19" adapter 5HU 1/1 for KB 90 cabinets, for CMT, CMTA, PSA12/15 |
| ZZA-96 |
19" adapter, 6HU, 1/1 for KB90 cabinets |
| ZZA-99 |
19" adapter, 4 HU, 3/4 (for EPM/CMS) for KB90 cabinets |
| ZZA-S01 |
19" rack mount kit for PSP |
| ZZA-S02 |
19" rack adapter for PTW60 |
| ZZA-S03 |
19"-Adapter for casing BW2000, 4HU, 7/8, D250 |
| ZZA-T01 |
19" adapter 1/2 type 01 |
| ZZA-T02 |
19" adapter 1/2 type 02 |
| ZZA-T03 |
19" adapter 1/2 type 03 |
| ZZA-T04 |
19" adapter 1/2 type 04 |
| ZZA-T05 |
19" adapter 1/2 type 05 |
| ZZA-T06 |
19" adapter 1/2 type 06 |
| ZZA-T07 |
19" adapter 1/2 type 07 |
| ZZA-T08 |
19" adapter 1/2 type 08 |
| ZZA-T10 |
19" adapter 1/2 type 10 |
| ZZA-T11 |
19" adapter 1/2 type 11 |
| ZZA-T12 |
19" adapter 1/2 type 12 |
| ZZA-T13 |
19" adapter 1/2 type 13 |
| ZZA-T14 |
19" adapter 1/2 type 14 |
| ZZA-T15 |
19" adapter 1/2 type 15 |
| ZZA-T21 |
19" adapter 1/2 type 21 |
| ZZA-T28 |
19" adapter 1/2 type 28 |
| ZZA-T29 |
19" adapter 1/2 type 29 |
| ZZA-T30 |
19" adapter 1/2 type 30 |
| ZZA-T45 |
Adapter for telescopic slides type C-300-S and C-230-S for BW2000 cabinets 2-5HU 1/1 depth 450 mm |
| ZZK-945 |
Transit case for instruments design KB90 19" 4 HU depth 570 mm |
| ZZK-955 |
Transit case for instruments design KB90 19" 5 HU depth 570 mm |
| ZZM-32 |
Accessory: Memory card 32 kB for UAF and SAF/SFF |
| ZZT-214 |
BW 2000 bag for instruments 2 HU 1/1 depth 450 mm |
| ZZT-222 |
KB90 bag for units 1/2 19" 2 HU, depth 240 mm |
| ZZT-314 |
KB90 bag for units 1/1, 19" 3 HU high, depth 460 mm |
| ZZT-473 |
BW 2000 bag for instruments 4 HU, 7/8, depth 350 mm |
