Lambda FS735/1/1 Overview
The FS730/FS735 Series Distribution Amplifiers are used to distribute a low noise 10 MHz frequency reference. Each system has one input and seven outputs, all on BNC connectors. The input is coupled through a series LC network allowing the use of inputs with a dc offset. The input source impedance is 50 O at 10 MHz.
The input is conditioned by a limiter which provides several advantages. It removes amplitude modulation from the input signal, outputs have fixed amplitude, and input noise that occurs more than 50 mV away from the zero-crossing is blocked. Virtually any waveform with a duty cycle near 50% may be used as an input.
Features:
- Sine wave outputs (+13 dbm)
- Amplitude leveling
- Low additive phase noise
- High channel-to-channel isolation
- High return loss
