| B16 |
Direct Generator and Receiver Access for 4-port ZVA40 |
| B21 |
Generator Step Attenuator Port 1; mechanical, 70dB in 10dB-steps, 40GHz |
| B22 |
Generator Step Attenuator Port 2; mechanical, 70dB in 10dB-steps, 40GHz |
| B23 |
Generator Step Attenuator Port 3; mechanical, 70dB in 10dB-steps, 40 GHz |
| B24 |
Generator Step Attenuator Port 4; mechanical, 70dB in 10dB-steps, 40 GHz |
| B31 |
Receiver Step Attenuator Port 1; mechanical, 35dB in 5dB-steps, 40GHz |
| B32 |
Receiver Step Attenuator Port 2; mechanical, 35dB in 5dB-steps, 40GHz |
| B33 |
Receiver Step Attenuator Port 3; mechanical, 35dB in 5dB-steps, 40GHz |
| B34 |
Receiver Step Attenuator Port 4; mechanical, 35dB in 5dB-steps, 40GHz |
| B7 |
Measurements on pulsed signals. Pulse Profile,Recording time up to 25ms, up to 30MHz bandwidth |
| DCV-2 |
Documentation of calibration values |
| K17 |
Increases the receiver bandwidth to 5MHz |
| K27 |
Two internal pulse generators (for ZVA and ZVT) |
| K4 |
Frequency converting measurement for ZVA and ZVT |
| K5 |
Phase measurement on mixers (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required) |
| K6 |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| K7 |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K8 |
Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
| K9 |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| ZVAB-B18 |
Removable Flash Disc for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| ZVAB-B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| ZVAB-K2 |
Time domain (for ZVA, ZVB, ZVT) |
| ZVAB-K30 |
Noise figure measurement on linear and frequency converting 2 port devices (for ZVA, ZBV and ZVT, |
