| B22 |
Generator attenuator port 2 mechanical, 70 dB in 10-dB-steps 8 GHz |
| B23 |
Generator attenuator port 3 mechanical, 70 dB in 10-dB-steps, 8 GHz |
| B24 |
Generator attenuator port 4 mechanical, 70 dB in 10-dB-steps 8 GHz |
| B31 |
Receiver attenuator port 1 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B32 |
Receiver attenuator port 2 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B33 |
Receiver attenuator port 3 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B34 |
Receiver attenuator port 4 mechanical, 35 dB in 5-dB-steps 8 GHz |
| B7 |
Measurements on pulsed signals. Pulse Profile,Recording time up to 25ms, up to 30MHz bandwidth |
| B9 |
Cable set for group delay measurements ZVA-K9 (for 4-port ZVA24 and 4-port ZVA40 |
| DCV-2 |
Documentation of calibration values |
| DKD |
ZVA8 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| K17 |
Increases the receiver bandwidth to 5MHz |
| K27 |
Two internal pulse generators (for ZVA and ZVT) |
| K4 |
Frequency converting measurement for ZVA and ZVT |
| K5 |
Phase measurement on mixers (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required) |
| K6 |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| K7 |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K9 |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| R3 |
THREE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY |
| R5 |
FIVE YEARS OF DEPOT REPAIR COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF NECESSARY TO COMPLETE A REPAIR - 1ST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANT |
| UK7 |
Upgrade Kit Trigger Input (Retrofit is required for Pulse-Profile Option ZVA-K7 with older units. |
| ZVA24-B31 |
Receiver attenuator port 1 mechanical, 35 dB in 5-dB-steps 24 GHz |
| ZVA24-B32 |
Receiver attenuator port 2 mechanical, 35 dB in 5-dB-steps, 24 GHz |
| ZVA8.C5 |
FIVE YEARS OF US DEPOT CALIBRATIONS BASED ON R&S RECOMMENDED CALIBRATION INTERVAL - INCLUDES TEST DATA. THE FIRST CALIBRATION IS INCLUDED WITH PRODUCT DELIVERY WITH 4 ADDITIONAL DEPOT CALIBTATIONS |
| ZVAB-B18 |
Removable Flash Disc for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| ZVAB-B19 |
Second removable flash disc (including firmware for ZVA and ZVB with FMR7) |
| ZVAB-B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| ZVAB-B44 |
USB-IEC/IEEE Adapter and driver-SW (USB-Stick) for control of external generators |
| ZVAB-K2 |
Time domain (for ZVA, ZVB, ZVT) |
| ZVAB-K30 |
Noise figure measurement on linear and frequency converting 2 port devices (for ZVA, ZBV and ZVT, |
