| B10 |
GPIB interface |
| B22 |
RF preamplifier gain 20 dB |
| B30 |
DC power supply 12 - 28 V |
| B31 |
NiMH battery pack |
| B4 |
OCXO reference frequency |
| B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| B6 |
TV trigger for FSL and for ZVL with ZVL- |
| B7 |
NarrowOption resolution filters 10 Hz - 300 Hz |
| B8 |
Gated sweep function for FSL and for ZVL with ZVL-K1 |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 1 additional depot calibration(s). |
| DCV-1 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| EVS-Z6 |
Accessory: Protective hard cover (for EVS300, FSL, ZVL) |
| FSL-B10 |
GPIB interface |
| FSL-B22 |
RF preamplifier, gain 20 dB (software license) |
| FSL-B30 |
DC power supply 12 - 28 V |
| FSL-B31 |
NiMH battery pack |
| FSL-B4 |
OCXO reference frequency |
| FSL-B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| FSL-B6 |
TV trigger (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-B7 |
NarrowOption resolution filters, 10 Hz - 300 Hz (software license) |
| FSL-B8 |
Gated sweep function (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K14 |
Spectrogram measurement, application firmware (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K20 |
Application firmware for cable TV and TV measurements (software license) |
| FSL-K30 |
Application firmware for noise figure and gain measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K7 |
Analogue demodulation AM/FM/PM (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K72 |
3GPP Code Domain Power measurements for base station (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K9 |
Power sensor measurements with NRP (software license) |
| FSL-K91 |
Application firmware for WLAN 802.11A,B,G measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K93 |
Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| K1 |
Spectrum analysis function (for ZVL3, ZVL6, ZVL13) |
| K14 |
Spectrogram measurement, application firmware for FSL and for ZVL with ZVL-K1 |
| K2 |
Distance to Fault Measurement (for ZVL3, ZVL6, ZVL13) |
| K20 |
Application firmware for cable TV and TV measurements for R&S FSL |
| K3 |
Time Domain analysis (for ZVL3, ZVL6, ZVL13) |
| K30 |
Application firmware for noise figure and gain measurements for FSL and for ZVL with ZVL-K1 |
| K7 |
Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1 |
| K72 |
3GPP Code Domain Power measurements for base station for FSL and for ZVL with ZVL-K1 |
| K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) for FSL and for ZVL with ZVL-K1 |
| K9 |
Power sensor measurements with NRP |
| K91 |
Application firmware for WLAN 802.11A,B,G measurements for FSL and for ZVL with ZVL-K1 |
| K93 |
Application Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL and for ZVL with ZVL-K1 |
| R3 |
Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |