| 1 |
Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack. |
| 10 |
User-defined Modulation Capability (683xxC, and 693xxB): Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows® based software. |
| 11 |
0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz. |
| 14 |
Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console. |
| 15A |
High Power Output (680xxC, 681xxC, 690xxB and 691xxB): Adds high power RF components to the instrument in the 2-20 GHz frequency range. |
| 15B |
High Power Output (683xxC and 693xxB): Adds high-power RF components to the instrument in the 220 GHz frequency range. |
| 16 |
High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB. |
| 17A |
Delete Front Panel (68100C, 68300C, 69100B and 69300B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed. |
| 17B |
Delete Front Panel (68000C and 69000B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed. |
| 18 |
mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20.) |
| 19 |
SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.21987. |
| 20 |
SCAN Modulator: Adds an internal SCAN modulator for simulating high-depth amplitude modulated signals in models 68337C, 68347C, 69337B and 69347B only. Requires an external modulating signal input. (Not available in combination with Option 7, Option 18, or Option 22.) |
| 21A |
(690xxB, 691xxB): Low Phase Noise, Non-pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz |
| 21B |
(693xxB): Low Phase Noise, Pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz |
| 22 |
0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. Derate output power by 1 dB for =20 GHz and 2 dB for >20 GHz (Not available in combination with Option 20.) |
| 2A |
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of =20 GHz. Rated RF output power is reduced. |
| 2B |
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 40 GHz. Rated RF output power is reduced. |
| 2C |
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 50 GHz. Rated RF output power is reduced. |
| 2D |
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 60 GHz. Rated RF output power is reduced. |
| 2E |
Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of =8.4 GHz. Rated RF output power is reduced. |
| 2F |
Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of =20 GHz. Rated RF output power is reduced. |
| 7 |
Delete AM/FM Generators (683xxC and 693xxB): Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20.) |
| 9 |
Rear Panel RF Output: Moves RF output connector to the rear panel. |
