HP / Keysight / Agilent 10777A Overview
The Agilent 10777A Optical Square, used with Agilent straightness measurement optics, adds squareness measurement capability to the Agilent 5529A calibration system. The optical square measures the squareness of axes during laser calibration of a machine tool. The Agilent 10777A uses two accurately-aligned mirrors to direct an output beam at precisely 90 degrees to an input beam.
The Agilent 10777A is one component of a family of measurement optics that tailor interferometer systems for the physical layout and measurement requirements of each application. Configured with appropriate laser head and system electronics, the optics are part of a precise positioning or calibration system that improves product quality, increases yields, and facilitates manufacture of precision products.
Features:
The Agilent 10777A is one component of a family of measurement optics that tailor interferometer systems for the physical layout and measurement requirements of each application. Configured with appropriate laser head and system electronics, the optics are part of a precise positioning or calibration system that improves product quality, increases yields, and facilitates manufacture of precision products.
Features:
- Squareness Measurement Specifications
- The following specifications assume that the Agilent Dimensional Metrology Analysis System is used in conjunction with the Agilent 5529A calibration system to provide averaging and calculation capabilities for straightness, parallelism and squareness measurements.
- Accuracy
- Short Range Optics:
- Metric Units Mode: ±(0.5 + 0.1M) arc-seconds ±0.01 theta
- English Units Mode: ±(0.5 + 0.03F) arc-seconds ±0.01 theta
- Long Range Optics:
- Metric Units Mode: ±(0.5 + 0.01M) arc-seconds ±0.025 theta
- English Units Mode: ±(0.5 + 0.003F) arc-secondes ±0.025 theta
- where:
- theta = calculated out-of-squarness angle in arc-seconds
- M = distance of travel of the moving optic in meters
- F = distance of travel of the moving optic in feet
- General Characteristics
- Weight: 4.0 kg (8.9 pounds)
- Materials Used:
- Housing: Aluminum
- Optics: Optical Grade Glass
- Optical Efficiency: 92% (worst case)
- Provides a constant-deviation device for out-of-squareness measurement
- Straightness and squareness measurements made with one optical setup
- Includes an optical mount that aids alignment
- Available for use in a variety of Agilent systems, including the Agilent 5529A calibration system
