HP / Keysight / Agilent N5242A - Network Analyzers

Name: HP / Keysight / Agilent N5242A
Brand: HP / Keysight / Agilent
SKU: N5242A
Availability: InStock

PNA-X Vector Network Analyzer, 10 MHz- 26.5 GHz

HP / Keysight / Agilent N5242A Network Analyzers

Get a Quote

Sell Your N5242A

We buy used Network Analyzers equipment!

Trade-in quote →

Rent N5242A

Short-term rental options available

Rental quote →

Product Details

Model:: N5242A
Manufacturer:: HP / Keysight / Agilent
Category:: Network Analyzers
Availability:: Available - Request Quote

Can't find the exact model? Request a quote and we'll respond quickly.

HP / Keysight / Agilent N5242A Overview

The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.

Applications:

S-parameters (CW and pulsed)
Noise figure
Gain compression
Intermodulation and harmonic distortion
Conversion gain/loss
True-differential stimulus
Millimeter-wave
Nonlinear waveform and X-parameter® characterization
Antenna test

Features:

10 MHz to 26.5 GHz
2- or 4-ports with two built-in sources
132 dB system and 130 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth
High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)
Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver
Low noise floor of -114 dBm at 10 Hz IFBW

HP / Keysight / Agilent N5242A Complete Specifications

008	Pulsed-RF measurements
010	Time-domain measurements
014	Configurable Test Set Option (front panel access loops between source output and coupler input) Standard Option
016	Add Reciever Attenuators (35 dB in 5 dB steps)(Standard Option)
020	Add IF inputs
021	Add pulse modulator to internal first source
022	Add pulse modulator to internal second source
025	Add four internal pulse generators
028	Noise figure measurements using standard receivers
029	Fully-corrected noise-figure measurements to 26.5 GHz
080	Frequency offset measurements
081	Reference Channel Switch (Adds internal switch to R1 Path)(Standard Option w/080)
082	Scalar calibrated converter measurements
083	Vector and scalar calibrated converter measurements
084	Embedded LO measurements
086	Gain compression application
087	Intermodulation distortion measurements
088	Source phase control
118	Fast CW mode
1A7	ISO 17025 compliant calibration
1CM	Rack mount kit for installation without handles
1CP	Rack mount kit for installation with handles
200	2 ports, single source
219	Add extended power range and bias-tees to 2 port analyzer
224	Add internal second source, combiner and mechanical switches to 2-port analyzer
301	Application for use with standard CalPods
302	Application for use with temperature-characterized CalPods
400	4 ports, dual source
419	Add extended power range and bias-tees to 4 port analyzer
423	Add internal combiner and mechanical switches to 4-port analyzer
460	Integrated true-mode stimulus application
510	Nonlinear Component Characterization
514	Nonlinear X-Parameters
518	Nonlinear Pulse Envelope Domain
520	Arbitrary load impedance X-parameters
551	N-port calibrated measurements
629	Noise figure accessories
897	Built-in performance test software for Agilent inclusive calibration, perpetual license
898	Built-in performance test software for standards compliant calibration, perpetual license
A6J	ANSI Z540 compliant calibration
H08	Pulsed - RF measurments
H85	Removes bias tees between source attenuators and test port couplers
N1966A	Pulse/IO Adapter
N8981A	Spare hard drive for use with 1.1 GHz Pentium M CPU board Recommended for use in secure environments
P04	4 Ports Native
PS-S10	Remote scheduled productivity assistance. Select 1 to 999 hours.
PS-S20	Startup assistance
PS-S20-01	Recommended Startup assistance
PS-T10-PNA	PNA operator training for 8 students at the customer's site , H7215B-203
PS-T12-PNA	PNA programming for 8 students at the customer's site , H7215B-204
R-50C-011-3	Agilent Calibration - 3 years
R-50C-011-5	Agilent Calibration - 5 years
R-50C-016-3	ISO 17025 Compliant Calibration - 3 years
R-50C-016-5	ISO 17025 Compliant Calibration - 5 years
R-50C-021-3	ANSI Z540-1-1994 Calibration - 3 years
R-50C-021-5	ANSI Z540-1-1994 Calibration - 5 years
R-50J-001-3	Onsite System Verification - 3 years
R-50U-001-3	Onsite Agilent Calibration - 3 years
R-50U-002-3	Onsite ANSI Z540-1-1994 Calibration - 3 years
R-51B-001-3C	Return to Agilent Warranty - 3 years
R-51B-001-5C	Return to Agilent Warranty - 5 years
R-51B-001-C	Return to Agilent Warranty - 1 year
R-51C-001-1CU	Onsite Warranty - 1 year
R-51C-001-3CU	Onsite Warranty - 3 years
S02	Second Source Module
UK6	Commercial calibration certificate with test data
UNL	High Power Measurement w/ Bias tees Configuration (Allows Ext. Amplifiers between RF Source and Coupler Input)(Standard Option)