| CA-1A |
Carrying Case |
| CA-2A |
Carrying Case |
| CIA-V |
Current Injection adapter - Variable; Direct current injection, 0-8kV |
| CTC-1 |
Coax monitor for ESD current waveform (For 400 MHz applications only) |
| CTC-3 |
Coaxial current monitor target per IEC 61000-4-2 |
| DCA-1 |
DC Output Calibration Attenuator |
| DN-1 |
150 pF/150 ohms discharge network per the 1984 version of IEC 801-2 |
| DN-10 |
150 pF/330 ohms discharge network per current IEC 61000-4-2 |
| DN-2 |
Nema Part DC33 and MIL-STD 883C discharge network (100 pF/1500 ohms). Network only; no waveform specification. |
| DN-3 |
Upper/lower-body-model (700 pF/100K ohms/150 pF/150 ohms) |
| DN-4 |
Segmented-body-model (700 pF/100K ohms/150 pF/150/20 pF-50 ohms) |
| DN-6 |
Optimum basic human-body-model (100pF/500 ohms) |
| DN-7 |
300 pF/5K ohms human-body-model discharge network per SAE Std. J1211 |
| DN-7A |
330 pF/2K ohms human-body-model discharge network per SAE Std. J1113 |
| DNX |
Custom configured relay module (state RC values on order) |
| DT-1 |
IEC Ball Discharge Tip |
| DT-2 |
Corona and Field-Enhancement Tip |
| DT-3 |
Wedge, Simulating Tool |
| EC-1 |
Probe Conversion Cable: Remotes any discharge network as light, hand-held probe |
| FA/CIA-10 |
10kV Fast-Approach Current Injection Adapter |
| FA/CIA-20 |
20kV Fast-Approach Current Injection Adapter |
| FCS-1 |
Field and Corona Sensor Group common monitor unit, HEC-1; H-Field sensor, HFS-1; E-Field sensor, EFS-1; Pre-Discharge corona sensor, CCS-1 |
| FT-10 |
Proximity-Test, Self-Discharge Tip |
| FT-11 |
E-Field Simulator; requires FA/CIA-20 |
| FT-12 |
H-Field Simulator; requires FA/CIA-20 |
| FT-21 |
Discharge E-Field Collapse Adapter; requires FA/CIA-20 |
| HT-10/DT-4 |
True ESD Hand-Tip/Discharge-Tip Combination |
| PSC-1 |
Power Supply/Control Unit |
| TP-3 |
Target-plane Assembly per IEC-1000-4-2 |
| TPC-1 |
True-ESD Fastest-risetime contact-mode tip |
