| B10 |
GPIB interface |
| B22 |
RF preamplifier gain 20 dB |
| B30 |
DC power supply 12 - 28 V |
| B31 |
NiMH battery pack |
| B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| B6 |
TV trigger for FSL and for ZVL with ZVL- |
| B7 |
NarrowOption resolution filters 10 Hz - 300 Hz |
| B8 |
Gated sweep function for FSL and for ZVL with ZVL-K1 |
| C3 |
Three years of Factory Standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of factory standard depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-1 |
Documentation of calibration values |
| EVS-Z6 |
Accessory: Protective hard cover (for EVS300, FSL, ZVL) |
| K14 |
Spectrogram measurement, application firmware for FSL and for ZVL with ZVL-K1 |
| K20 |
Application firmware for cable TV and TV measurements for R&S FSL |
| K30 |
Application firmware for noise figure and gain measurements for FSL and for ZVL with ZVL-K1 |
| K7 |
Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1 |
| K72 |
3GPP Code Domain Power measurements for base station for FSL and for ZVL with ZVL-K1 |
| K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) for FSL and for ZVL with ZVL-K1 |
| K82 |
CDMA2000 base station analysis |
| K84 |
Analysis of 1xEV-DO base station signals |
| K9 |
Power sensor measurements with NRP |
| K91 |
Application firmware for WLAN 802.11A,B,G measurements for FSL and for ZVL with ZVL-K1 |
| K91N |
Upgrade of FSL-K91 to 802.11n |
| K92 |
Application firmware for WiMAX 802.16, OFDM measurements |
| K92U |
Upgrade from FSL-K92 to FSL-K93 |
| K93 |
Application Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL and for ZVL with ZVL-K1 |
| R3 |
Three years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including Factory Standard recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty |
