| B-B18 |
Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| B-B18 |
Removable hard disk 160GB (including firmware) for R&S® ZVA and R&S® ZVB with FMR7 |
| B-B19 |
Additional removable Flash Disk 4GB for ZVA/ZVB with controller FMR6/5 with firmware for ZVA/ZVB |
| B-B19 |
|
| B-B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| B-B44 |
USB-IEC/IEEE Adapter and driver-SW (USB-Stick) for control of external generators |
| B-K2 |
Time domain (for ZVA, ZVB, ZVT) (software license) |
| B-K30 |
Noise figure measurement on 2 port devices (for ZVA and ZVT, |
| B11 |
Cable Set A for ZVA80 model .04, ZVA50 4-port based |
| B11 |
Cable Set B for ZVA80 model .04, ZVA80 BU based |
| B7 |
Measurements on pulsed signals. Pulse Profile,Recording time up to 25ms, up to 30MHz bandwidth |
| B8 |
External attenuator control. Control unit for electronic attenuators of ZVAZ90E, ZVA-Z110E |
| B9 |
Cable set for option ZVA-K9. (4-port ZVA8. Requires ZVAxy-B16) |
| B9 |
Cable set for option ZVA-K9. (4-port ZVA24, ZVA40 (2.9mm) Requires ZVAxx-B16) |
| B9 |
Cable set for option ZVA-K9. (4-port ZVA40 (2.4mm), ZVA50, ZVA67. Requires ZVAxx-B16) |
| BE |
Customer Supply of a R&S ZVA-Z75 converter for a R&S ZVA80 model .04 |
| DE |
Customer Supply of a R&S ZVA50 4-port for a R&S ZVA80 model .04 |
| K17 |
Increases the receiver bandwidth to 5MHz (software license) |
| K27 |
Two internal pulse generators (for ZVA and ZVT) (software license) |
| K5 |
Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) |
| K6 |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| K7 |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K8 |
Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
| K9 |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| U27 |
Motherboard upgrade kit for ZVAs produced before May 2009 to use ZVAK27 |
| UK7 |
Upgrade Kit Trigger Input (Retrofit is required for Pulse-Profile option R&S®ZVA-K7 with older units. |
