| /04-C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| /04-C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. |
| /04-R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| /04-R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| /06-C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| /06-C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. |
| /06-R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| /06-R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| 8-B21 |
Generator Step Attenuator ZVB4, ZVB8, port 1, mechanical, 70dB max. |
| 8-B22 |
Generator Step Attenuator ZVB4, ZVB8, port 2, mechanical, 70dB max. |
| 8-B23 |
Generator Step Attenuator ZVB4, ZVB8, port 3, mechanical, 70dB max. ZVB 4-port: 3 atts at P1,P2,P3 possible |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| DKD |
ZVB4 DKD(ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| K3 |
Mixer- and harmonic measurements (software license) |
| ZV-Z51 |
Calibration unit, 300 kHz - 8 GHz; 4 ports; 3.5 mm (f) |
| ZV-Z51 |
Calibration unit, 300 kHz - 8 GHz; 4 ports, N(f) |
| ZVAB-B18 |
Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5 (factory installed only) |
| ZVAB-B18 |
Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| ZVAB-B18 |
Removable hard disk 160GB (including firmware) for R&S® ZVA and R&S® ZVB with FMR7 |
| ZVAB-B4 |
Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| ZVAB-K2 |
Time domain (for ZVA, ZVB, ZVT) (software license) |
| ZVAB-K30 |
Noise figure measurement on 2 port devices (for ZVA and ZVT, |
