| B10 |
GPIB interface |
| B22 |
RF preamplifier gain 20 dB |
| B30 |
DC power supply 12 - 28 V |
| B31 |
NiMH battery pack |
| B4 |
OCXO reference frequency |
| B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| B6 |
TV trigger for FSL and for ZVL with ZVL- |
| B7 |
NarrowOption resolution filters 10 Hz - 300 Hz |
| B8 |
Gated sweep function for FSL and for ZVL with ZVL-K1 |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-1 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| EVS-Z6 |
Accessory: Protective hard cover (for EVS300, FSL, ZVL) |
| FSL-B10 |
GPIB interface |
| FSL-B22 |
RF preamplifier, gain 20 dB (software license) |
| FSL-B30 |
DC power supply 12 - 28 V |
| FSL-B31 |
NiMH battery pack |
| FSL-B4 |
OCXO reference frequency |
| FSL-B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| FSL-B6 |
TV trigger (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-B7 |
NarrowOption resolution filters, 10 Hz - 300 Hz (software license) |
| FSL-B8 |
Gated sweep function (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K14 |
Spectrogram measurement, application firmware (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K20 |
Application firmware for cable TV and TV measurements (software license) |
| FSL-K30 |
Application firmware for noise figure and gain measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K7 |
Analogue demodulation AM/FM/PM (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) (software license) |
| FSL-K72 |
3GPP Code Domain Power measurements for base station (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K9 |
Power sensor measurements with NRP (software license) |
| FSL-K91 |
Application firmware for WLAN 802.11A,B,G measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-K93 |
Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| FSL-Z3 |
Soft carrying bag |
| FSL-Z4 |
Additional charger unit for FSL-B31. Allows charging the battery without FSL |
| K1 |
Spectrum analysis function (for ZVL3, ZVL6, ZVL13) |
| K14 |
Spectrogram measurement, application firmware for FSL and for ZVL with ZVL-K1 |
| K2 |
Distance to Fault Measurement (for ZVL3, ZVL6, ZVL13) |
| K20 |
Analog and digital cable TV measurements |
| K3 |
Time Domain analysis (for ZVL3, ZVL6, ZVL13) |
| K30 |
Application firmware for noise figure and gain measurements for FSL and for ZVL with ZVL-K1 |
| K7 |
Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1 |
| K72 |
3GPP Code Domain Power measurements for base station for FSL and for ZVL with ZVL-K1 |
| K8 |
Application firmware for TX measurements acc. to Bluetooth v. 1.1 and 2.0 (EDR) for FSL and for ZVL with ZVL-K1 |
| K9 |
Power sensor measurements with NRP |
| K91 |
Application firmware for WLAN 802.11A,B,G measurements for FSL and for ZVL with ZVL-K1 |
| K93 |
Application Firmware for WIMAX 802.16 OFDM/OFDMA Measurements for FSL and for ZVL with ZVL-K1 |
| NRP-Z11 |
Average power sensor for universal use, 10 MHz - 8 GHz, 200 pW - 200 mW, |
| NRP-Z21 |
Average power sensor for universal use 10 MHz - 18 GHz, 200 pW - 200 mW, |
| NRP-Z22 |
Average power sensor 10 MHz - 18 GHz, 2 nW - 2 W for universal use,N(m) |
| NRP-Z23 |
Average power sensor 10 MHz - 18 GHz, 20 nW - 15 W for universal use, N(m) |
| NRP-Z24 |
Average power sensor 10 MHz - 18 GHz, 60 nW - 30 W for universal use, N(m) |
| NRP-Z51 |
Thermal power sensor 0 - 18 GHz, 1 µW - 100 mW, N(m) |
| NRP-Z55 |
Thermal power sensor 0 - 40 GHz, 1 µW - 100 mW, 2.92mm(m) |
| NRP-Z91 |
Average power sensor 9 kHz - 6 GHz, 200 pW - 200 mW, N(m) |
| R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| RAM |
Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at both ends, N-connectors |
| RAZ |
Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors |
| ZCAN |
Calibration kit, type N, 75 Ohm, 0-3 GHz precision load, short/open and through N-male and N-female |
| ZRC |
SWR bridge 50 Ohm 40 kHz - 4 GHz, calibration standard incl. test port connector N female |
| ZV-Z191 |
RF Cable 50 Ohm; N(m) to N(m); DC to 18GHz, flexible, phase stable; 610mm (24 inch) |
| ZV-Z191 |
RF Cable 50 Ohm; N(m) to N(m); DC to 18GHz, flexible, phase stable; 910mm (36 inch) |
| ZV-Z192 |
RF Cable 50 Ohm; N(m) to PC3.5mm(m); DC to 18GHz, flexible, phase stable; 610mm (24 inch) |
| ZV-Z192 |
RF Cable 50 Ohm; N(m) to PC3.5mm(m); DC to 18GHz, flexible, phase stable; 910mm (36 inch) |
| ZV-Z21 |
Calibration kit N, 50 Ohm TOSM 0 - 18 GHz |
| ZV-Z235 |
Calibration kit 3.5mm, 0 Hz to 26 GHz, Open, Short, Match, through m/f each |
| ZV-Z33 |
3.5mm calibration kit with sliding matches 0 - 26.5 GHz certificated acc. |
| ZV-Z91 |
Flexible Precision Cable 50 Ohm N(m)/N(m); DC to 18 GHz; 635mm (25 inch); 1 piece |
| ZV-Z91 |
Flexible Precision Cable 50 Ohm N(m)/N(m); DC to 18 GHz; 965mm (38 inch); 1 piece |
| ZV-Z92 |
Flexible Precision Cable 50 Ohm; N(m)/3.5mm(m) DUT; DC to 18 GHz; 635mm(25 inch); 1 piece |
| ZV-Z92 |
Flexible Precision Cable 50 Ohm; N(m)/3.5mm(m) DUT; DC to 18 GHz; 965mm(38 inch); 1 piece |
| ZZA-211 |
19" adapter, 2 HU, 1/1 for BW2000 cabinets |
| ZZA-97 |
19" adapter 2 HU, 1/2 for KB 90 cabinets, for 1 or 2 units 350 mm depth / NRVS, URV35/55 |
| ZZA-98 |
19" adapter 2 HU/3 HU, ½ wide, for KB90 cabinets, 2 HU and 3 HU combinable, 350 mm depth/ NRVD |
| ZZA-S334 |
Adapter for BW2000 3HU 3/4 cabinet with impact protection |
| ZZA-T26 |
19" adapter 1/2 type 26 |
| ZZA-T27 |
19" adapter 1/2 type 27 |
