| ATV-VIDEO |
Analog TV test patterns additional test signals PAL/NTSC/SECAM ser.no. required |
| B110 |
High SNR FM Frontend not with ETL-B210, ETL-B215, ETL-B216, ETL-B300 or ETL-B310 |
| B201 |
Additional Interfaces Digital TV not with FSL-B5 |
| B203 |
RF Preselector with additional 75 Ohm RF input (retroffitting by factory) |
| B209 |
Harddisk 80 Gbyte (retrofitting by service) |
| B210 |
Digitaler demodulator for single carrier |
| B215 |
Digital demodulator for DTMBD |
| B216 |
Digital demodulator for single carrier and DTMB |
| B230 |
DC Power Supply 11 V to 19 V |
| B235 |
Li-Ion Battery Pack 10 Ah with battery charger (not with ETL-B280) |
| B280 |
MPEG Processing Board (retrofitting by service) |
| B281 |
Video and Audio Hardware Decoder Video: SDTV, MPEG-2, H.264 ETL-B280 required |
| B300 |
FPGA Extension board not with ETL-B110, ETL-B210, ETL-B215, E and ETL-B310 |
| BCDRIVE |
Broadcast Drive Test Software for ETL; requires ETL-K208 |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV |
Documentation of ETL calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| DV-DVBH |
DVB-H stream library Ser.no.of basic unit required |
| DV-H264 |
H.264 Stream Library SD, HD; MPEG-1 LII, AC-3 Serial number of basic unit required |
| DV-HDTV |
HDTV sequences DVB and ATSC, Sr.nr. required DVG: parallel cable required |
| DV-ISDBT |
ISDB-T transport stream library Ser.no.of basic unit required |
| DV-TCM |
Test Card M sequences DVB and ATSC; Sr.nr. required DVG: parallel cable required |
| FSL-B10 |
GPIB interface |
| FSL-B30 |
DC power supply 12 - 28 V |
| FSL-B31 |
NiMH battery pack |
| FSL-B4 |
OCXO reference frequency |
| FSL-B5 |
Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| FSL-B7 |
NarrowOption resolution filters 10 Hz - 300 Hz |
| FSL-K7 |
Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1 |
| FSL-K9 |
Power sensor measurements with NRP |
| FSL-K93 |
Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| K110 |
FM(Radio) Firmware ETL-B110 for SNR recommended |
| K111 |
FM(Radio) Audio Analysis/Generator ETL-K110 and ETL-B201 mod.03 required |
| K202 |
Analog TV Video Analysis |
| K203 |
Analog TV Video Generator Multi standard |
| K208 |
Measurement Log for digital TV |
| K210 |
DVB-C firmware ETL-B210 or ETL-B216 required |
| K213 |
J.83/B Firmware ETL-B210 or ETL-B216 required |
| K220 |
ATSC/8VSB firmware |
| K221 |
ATSC/8VSB SFN Frequency Offset R&S ETL-K220 required |
| K240 |
DVB-T/H Firmware for ETL |
| K241 |
DVB-T/H SFN frequency offset R&S ETL-K240 required |
| K250 |
T-DMB/DAB Firmware for ETL |
| K251 |
T-DMB/DAB SFN frequency offset ETL-K250 required. |
| K260 |
ISDB-T Firmware |
| K261 |
ISDB-T SFN frequency offset R&S ETL-K260 required |
| K280 |
MPEG TS Generator/Recorder R&S ETL-B209 and R&S ETL-B280 required |
| K281 |
HDTV and Dolby Upgrade ETL-B281 required |
| K282 |
MPEG Analysis/Monitoring ETL-B280 required |
| K283 |
In-depth analysis ETL-K282 required |
| K284 |
Data Broadcast Analysis ETL-K282 required |
| K285 |
TS Template monitoring ETL-K282 required |
| K320 |
ATSC MDTV, ATSC/8VSB Firmware ETL-B300 or ETL-B310 required |
| K321 |
ATSC MDTV, ATSC/8VSB SFN Freq. Offset ETL-K320 or ETL-K322 required |
| K322 |
ATSC MDTV Upgrade ETL-K220 and ETL-B300 or ETL-B310 requir |
| K340 |
DVB-T2 Firmware ETL-B300 required |
| R3 |
Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| SFU-K222 |
MediaFLO streams sgnals stress functions ser.no. required |
| SFU-K224 |
ISDB-T Transport Streams brazilian ISDB-TB signals (H.264) ser.no. required |
| SFU-K225 |
CMMB Transport Streams signals, stress functions ser.no. required |
| SFU-K226 |
ATSC and ATSC Mobile DTV Streams video/audio signals, stress functions ser.no. required |
