For example: Agilent E4440A or Anritsu 68369
4-channel High Speed Dynamic Bridge SPC

Model:VT1521

Manufactured by: VXI Technology

Category:Plug In / Part / Component / Module

VXI Technology VT1521 - Plug In / Part / Component / Module

VXI Technology VT1521 Overview

The VT1521 is designed to provide an accurate means of doing high speed bridge measurements. It provides bridge completion circuitry, excitation voltage, programmable low pass filters, and wide band buffered outputs.

The low-pass filter on each channel is a 4th order Butterworth active RC filter used to provide alias protection and improved noise reduction. The low-pass filter cutoff frequencies are 10kHz, 3kHz, 1kHz, 300Hz, and 100Hz.

Bridge completion resistors for 1/4 bridge measurements are built-in to the Option TFB terminal block with completion values of 120 ohm and 350 ohm. The VT1521 SCP is designed to provide self regulating Excitation Voltages of 0V, 1V, 2V, 5V, or 10V on each channel, for improved measurement accuracy.

The SCP provides a voltage gain of 0.5, 8, 64, or 512 for each channel. This SCP takes two adjacent slots in the VXI module.

Use the VT1521 with the following VXI modules:
VT1413C

Features:

  • Use with VT1413C
  • Use with Option TFB Terminal Block with Trifiler filter
  • Four Channels of Programmable Bridge Excitation with Voltage Values of 1V, 2V, 5V, or 10V
  • Wide Band Buffered Analog Output per Channel
  • Built-in Shunt Calibration Capability
  • Programmable Low Pass Filters from 100Hz up to 10kHz

How can we help you with today?

RECENTLY VIEWED