| 0-C3 |
Three Years Depot Calibration with test data |
| 0-C5 |
Five Years Depot Calibration with test data |
| 0-R3 |
Three Years Depot Repair Coverage |
| 0-R5 |
Five Years Depot Repair Coverage |
| 0DKD |
FSUP50 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
| B18 |
Removable hard disk (for FSUP model 09, 27 and 51 only; factory installed) |
| B19 |
Second removable disk for FSUP-B18 (for FSUP-B18,variant 1303.0400.05) for FSUP models .09. .27, .51 |
| B21 |
LO/IF connections for external mixers (for FSUP26 and FSUP50) |
| B25 |
Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ |
| B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
| B4 |
OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| B60 |
Low Phase Noise for cross correlation measurement (for FSUP8_V09, FSUP26_V27 and |
| B61 |
Cross correlation frequency extension (for FSUP50, FSUP-B60 required, order only with device!) |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| FS-K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| FS-K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| FS-K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for R&S®FSP/FSQ/FSU with WinXP, |
| FS-K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG with WinXP; |
| FS-K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| FS-K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| FS-K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
| FS-K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
| FS-K9 |
Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| FS-Z110 |
Harmonic mixer 75 - 110 GHz with separate IF and LO ports (three port mixer), |
| FS-Z60 |
Harmonic mixer 40 - 60 GHz for spectrum analyzers R&S®FSP40/R&S®FSV/R&S®FSU/R&S®FSQ/ |
| FS-Z75 |
Harmonic mixer 50 - 75 GHz for spectrum analyzers R&S®FSP40/R&S®FSV/R&S®FSU/R&S®FSQ/ |
| FS-Z90 |
Harmonic mixer 60 - 90 GHz for spectrum analyzers R&S®FSP40/R&S®FSV/R&S®FSU/R&S®FSQ/ |
| FSP-B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
| FSP-B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
| FSQ-K70 |
Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK, |
| FSUP50DKD |
FSUP50 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| K70 |
Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK, |
| K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
| K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
| K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
| K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
| K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
| K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
| K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
| K9 |
Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| K96 |
Generic OFDM measurement demodulator. Selectable pilot and data carriers and modulation type |
| R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| U2 |
Upgrade kit Windows XP without options B18, B20 includes fast CPU board |
| U2 |
Upgrade kit Windows XP with option B20 includes fast CPU board |
| U2 |
Upgrade kit Windows XP with option B18 Includes fast CPU board |
| U3 |
Upgrade CPU board and 1.5GB memory extension (NOT for FSU with FSUB18 or FSU-B20) |
| U3 |
Upgrade CPU board and 1.5GB memory extension (for FSU with flash drive FSU-B18) |
| U3 |
Upgrade CPU board and 1.5GB memory extension (for FSU with FSU-B20) |
| U73 |
Vector signal analysis, demodulation bandwidth 8 MHz (R&S®FSU), 28 MHz (R&S®FSMR), |
| Z1 |
Detector for AM noise measurement |
| Z110 |
Harmonic mixer 75 - 110 GHz for spectrum analyzers FSP40/FSU/FSQ/FSUP with separate IF and LO ports |
| Z60 |
Harmonic mixer 40 - 60 GHz for spectrum analyzers FSP/FSU/FSQ/FSIQ/FSEx with option B21 installed |
| Z75 |
Harmonic mixer 50 - 75 GHz for spectrum analyzers FSP/FSU/FSQ/FSIQ/FSEx with option B21 installed |
| Z90 |
Harmonic mixer 60 - 90 GHz for spectrum analyzers FSP/FSU/FSQ/FSIQ/FSEx with option B21 installed |
| ZZA-411 |
19" adapter, 4 HU, 1/1 for BW2000 cabinets |
