HP / Keysight / Agilent 1144A - Probes

The Agilent 1144A active probe provides an excellent combination of high bandwidth, high input resistance, and low input capacitance. This combination is superior to that of passive divider probes because it provides minimal circuit loading at high and low frequencies. As signal speeds increase, passive divider probes may not deliver the performance needed. This can result in waveshapes that do not represent the actual signal.

To help you minimize circuit loading, the Agilent 1144A boasts a 800 MHz bandwidth, 1 M Ohm input resistance, and 2 pF input capacitance. It can be connected to any instrument with 50 Ohm inputs. An external 50 Ohm termination can also be used with high impedance inputs.

For use with 54600, 3000, 5000, 6000 (350 MHz – 1 GHz), 7000, 8000, 80000, 9000 and 90000 Series oscilloscopes, the Agilent 1144A active probe requires the 1142A probe control and power module. The Agilent 01144-61604 adapter can be used with this power supply to provide power for two channels of active probing.

Versatile accessories allow for easy connection to your device under test. For example, the dual lead adapter combines with the two mini-pincher tips to provide a solid connection to 0.050 inch pitch surface mount devices for hands-off probing. Also, the ground bayonet has a short ground lead to minimize measurement errors such as ringing, caused by parasitic inductances.

For hands-off probing of SMT components with 0.5 mm (0.020 inch) to 0.8 mm (0.032 inch) pitch, an additional accessory is available: the Agilent 10075A 0.5 mm IC Clips Accessory Kit.

Features:

• dc to 800 MHz probe bandwidth
• 10:1 attenuation
• ±40 Vdc + peak ac maximum input voltage
• Requires the 1142A probe control and power module
• For complete details, click on the 1144A Data Sheet link.