HP / Keysight / Agilent N5411A Overview
The N5411A SATA electrical performance validation and compliance software for Infiniium 90000 Series oscilloscopes provides you with a fast and easy way to validate and debug your SATA 1.5Gbps (Gen 1) and 3.0Gbps (Gen 2) silicon, host bus adapter, port multiplier, high-density disk drive or optical disk drive. The SATA electrical test software allows you to automatically execute SATA II electrical checklist tests at each of the i, m and x interface points, and displays the results in a flexible report format. In addition to the measurement data, the report provides a margin analysis that shows how closely your device passed or failed each test.
For the best measurement accuracy, use the ZP series test fixture from Crescent Heart Software. The fixture provides access to the electrical measurement points required for the transmitter compliance testing. More information on test fixtures for SATA and eSATA device/host/cable testing can be obtained from Crescent Heart Software on-line.
For the best measurement accuracy, use the ZP series test fixture from Crescent Heart Software. The fixture provides access to the electrical measurement points required for the transmitter compliance testing. More information on test fixtures for SATA and eSATA device/host/cable testing can be obtained from Crescent Heart Software on-line.
Automation
- Test setup wizard guides you through test selection, configuration, connection, execution, and results reporting
- Measurement connection setups are displayed
- Oscilloscope setup is automatically configured for each test
- Test results report documents test configuration, measurements made, pass/fail status, margin analysis, and waveforms
Standards Supported:
- Complete set of SATA transmitter electrical tests
- 1.5 Gb/s, 3.0 Gb/s data rates
Recommended Test Fixture:
- Crescent Heart software TF-SATA-NE/ZP
- For eSATA compliance, use TF-eSATA-NE/ZP
